CFM-BL Pro Crimp Force Monitor BL Pro
Product details
Following the area division judgment method, a new judgment tool that compares the amount of force curve deviation is added up, enabling more accurate judgment.
CFM automatically decides the troublesome task of setting tolerance. Crimp defects are detected with appropriate tolerances for each product.
Built-in part number management function allows for 99 combinations of terminals and wires can be registered.
Memorize the optimal judgment conditions.
Product catalog
Related products
CFM-Lite
Crimp Force Monitor Lite
Easy-to-see, easy-to-use, and more compact.
CFM-MX Plus
Crimp Force Monitor MXP
Crimp force monitors (CFM-MX series) catch the slight change of crimp force taking place at an error.
CVM-3 Plus
Crimp Vision Monitor
This system sets a camera on the cable feeding route in an automatic crimping machine and inspects all crimped terminals.
CS07
Cross Section Monitor
With an increasing demand for electronic devices, automobiles, and similar applications, wiring harness are now required to have higher functionality and product quality than ever.
LIS-16H
Laser Image sensor
When a stripped wire passes in a laser beam curtain on the feeding route, LIS makes up its proportional image quickly and detects errors such as non-stripping, wire-cutoff, and water protection seal’s insertion error.
PT-X
Automatic Pull Tester
This pull tester series allows anybody to measure the pull force of crimped wire accurately.
PT-X20K
Extra thick wire pull tester
This is a pull tester dedicated to high-voltage wires such as EV battery cables.
